ANYCUBIC Photon Mono M7 PRO 14K Resin 3D Printer, 170mm/h Fast Printing, 10.1” Mono LCD with COB LighTurbo 3.0 Source, Dynamic Temperature Control Resin Vat, Build Volume 8.77”x4.96”x9.05”

Description

【Ultra Fast Speed】Anycubic Photon Mono M7 Pro achieves a high speed of 170mm/h in a 0.1mm layer thickness test the usage of high-speed resin. At the same time, the printing speed of standard resin reaches 130mm/h, breaking boundaries and greatly making improvements to printing efficiency, achieving actually fast printing
【High-Precision 14K】With a 14K monochrome LCD screen with 13312*5120 resolution and 16.8 ×24.8 μm XY resolution, the Photon Mono M7 Pro prints holes as small as 0.3 mm in diameter, which is more than enough to maintain fine printing tasks and make your models stand out
【Advanced COB LighTurbo 3.0】The COB light source system, combined with Fresnel lenses and front-facing reflectors can reach the light angle within 3°, and light uniformity is more than 90%. Anycubic LighTurbo 3.0 may be equipped with a light-off compensation set of rules, which ensures that each layer of the model is successfully exposed and got rid of from the mold, significantly making improvements to the printing success rate
【Upgraded Assisted Features】The dynamic temperature-controlled resin vat will adjust the temperature of the resin material to take care of the optimal print temperature always. And resin auto-fill feature enables automatic filling and one-key recycling of remaining resin
【Intelligent Design】Building on component connection status detection, residue detection, resin level Detection, failed print detection, and release film lifespan management, Photon Mono M7 Pro has added build plate installation detection. 6 types of intelligent detection can achieve startup detection, simplify the printing process, and reduce problems caused by misoperation